The EE741 in-line flow meter can be easily adapted for any measuring task. It is dedicated for accurate metering and monitoring of compressed air and technical gases in DN 15 to DN50 pipes.
Removal without disassembling the pipework
Application-specific adjustment under pressure
Exceptional price/performance ratio
Analogue, pulse and switching output
Modbus RTU and M-Bus
Integrated consumption meter
Compressed air consumption measurement
Monitoring of technical gases O2, N2, Ar, CO2. Other gases upon request
EE741 Modular, compact in-line flow meter
The thermal measuring principle and the well proven E+E hot film sensor element lead to best long-term stability and fast response time.
Outstanding measuring accuracy, even in the lower measuring range, is achieved by an application-specific multi-point factory adjustment performed at 7 bar (102 psi). This allows reliable leak detection and corresponding energy savings. The construction of the EE741 flow meter is optimized for easy installation and maintenance.
One and the same transmitter can be used for each of three pipe diameters:
The pipe diameter is easily set via the display menu or the EE-PCS product configuration software.
Once the gauge mounting block is installed in the pipeline, the transmitter can be installed and removed without any pipework. As a result, the EE741 flow meter is also ideal for temporary measurement at several installed mounting blocks. The sealing plug included in the scope of supply enable the normal operation of the compressed air system when the transmitter is removed.
An inline thermal mass flowmeter for DN15 to DN50 (1/2″ to 2″) pipes and up to 16 bar (232 psi). The ball valve permits fast installation and removal with only a brief interruption of the flow measurement.
A multifunctional inline thermal mass flowmeter for DN40 to DN80 (1 1/2″ to 3″) pipes and up to 40 bar (580 psi). The gauge mounting block with hot tap valve for efficient installation and removal without interruption of the flow measurement.