If you can’t find what you’re looking for, please give us a call at 888-855-8880

EE772 In-Line Thermal Mass Flow Meter

A multifunctional inline thermal mass flowmeter for DN40 to DN80 (1 1/2″ to 3″) pipes and up to 40 bar (580 psi). The gauge mounting block with hot tap valve for efficient installation and removal without interruption of the flow measurement.


EE772 In-Line Thermal Mass Flow Meter

The EE772 is a thermal mass flow meter for compressed air and gases. Irrespective of pressure and temperature, the EE772 flow meter registers mass flow, volumetric flow or standard flow.

Key Features:

  • Gauge mounting block with hot tap valve for rapid installation and removal without flow interruption
  • Additional installation of dew point- and pressure sensor
  • Remote, interchangeable probe for easy mounting
  • Pipe diameter DN40 – DN80 (1 1/2″ – 3″)
  • Pressure range up to 40 bar (580 psi) (PN40)
  • wide measuring range up to 200 Nm/s (39370 SFPM)

EE772 In-Line Thermal Mass Flow Meter

The flow meter can be used effectively to measure the consumption of compressed air, nitrogen, CO2 or other non-corrosive gases.

The gauge mounting block allows for the installation and removal without flow interruption. Regular calibration, without taking into account the device downtime, is therefore always an option. Besides the mass flow probe, the gauge mounting block with hot tap valve can accommodate also a dew point and a pressure sensor.

EE772 flow meter employs the well proven E+E hot-film sensor element with high immunity to contamination, which leads to outstanding long-term stability and accuracy even under harsh operating conditions.

With wide measuring range from 0.5 to 200 Nm/s (100...39370 SFPM) (1:400) and fast response time, one and the same flow meter model can be employed throughout the entire gas supply system. It records accurately even the smallest flow which represents an essential prerequisite for calculating consumption costs or for finding leaks.

Every E+E flow meter undergoes a precise factory calibration procedure at a pressure of 7 bar (102 psi), the corresponding calibration certificate is included in the standard scope of supply. The EE772 flow meter is available with an additional MODBUS RTU or M-BUS (Meter-Bus) interface.