EE300Ex
Humidity and temperature transmitter for intrinsically safe applications
The EE300Ex humidity and temperature transmitter is dedicated for measurement in explosion hazard areas. It complies with the classifications for Europe (ATEX), International (IECEx), USA / Canada (FM), China (NEPSI) and Korea (KCs) and can be employed in gas and dust explosion hazard areas. The intrinsically safe EE300Ex can be installed in the explosion hazard area even in zones 0 / 20 (Divison 1).
Description
EE300Ex
Key Features
- For gas and dust applications
- Direct mounting in zones 0 / 20
- All humidity related physical quantities
- Best precision up to 180°C (356 °F)
- Pressure-tight up to 20 bar (290 psi)
- Wall mount or remote probe versions
- Water content and water activity in oil
Technical data
- 0-100% RH-40…-15 °C additional uncertainty ±0.125 %RH/°C
- ±1.3% RH
±0.2 °C (±0.36 °F) - 0.01…20 bar (0.15…290 psi)
- 4-20 mA (2-wire)
- 24 V DC
Typical applications
- Chemical industry
- Pharmaceutical industry
- Painting cabinets
- Explosion hazard storage rooms
- Power stations
- Grain mills
- Oil platforms
- Moisture in oil measurement
The 2-part enclosure facilitates easy installation and dismounting for calibration without time-consuming wiring. The robust and easy-to-clean stainless steel housing is optimized for the pharmaceutical and chemical industries. The well proven E+E humidity sensor technology grants reliable, long-term stable measurements in challenging applications.
Besides measurement of relative humidity and temperature, the EE300Ex calculates all humidity related parameters, such as dew-point temperature [Td], wet-bulb temperature [Tw], absolute humidity [dv], etc. The intrinsically safe humidity and temperature transmitter features two 4-20 mA outputs in 2-wire technology.
Moisture in oil measurement
In the same way as humidity measurement in air, the EE300Ex is appropriate for moisture in oil measurement. The moisture content of oil can be issued absolute as water content in [ppm] or relative as water activity [aw]. Typical applications for moisture in oil measurement are found in systems for cleaning/drying oil or on oil platforms for online monitoring of lubrication and gear oils.
Downloads EE300Ex
| DATASHEET |
|---|
EE300Ex-M1 Datasheet(805.53 kb) |
EE-PCA Product Configuration Adapter(790.77 kb) |
Humidity Calibration-Kit Datasheet(642.96 kb) |
| SUPPORT LITERATURE |
|---|
EE300Ex ATEX-Certificat(203 kb) |
EE300Ex FM Approvals Certificate of Compliance (USA)(339.88 kb) |
EE300Ex IECEx Certificate of Conformity(125.37 kb) |
| EU DECLARATION OF CONFORMITY |
|---|
EE300Ex CE-DoC(179.95 kb) |
Declaration of Conformity to EU REACH(367.42 kb) |
| SOFTWARE |
|---|
EE-PCS Product Configuration Software(21982.92 kb) |
Related Products
EE212
Modular Humidity/Temperature Sensor
The EE212 humidity (RH) and temperature (T) sensor with interchangeable sensing module is optimized for demanding climate control applications in most various industries.
EE260
Heated Humidity and Temperature Probe for Meteorology
The EE260 humidity and temperature probe with heated humidity sensing element and probe heating delivers precise and reliable measuring results even at high humidity conditions.
EE100Ex
Intrinsically Safe Humidity and Temperature Sensor
The EE100Ex intrinsically safe sensor is dedicated for measurement of relative humidity [RH] and temperature [T] in explosion hazard areas. It complies with the ATEX (Europe), IECEx (international), Korea (KCs) and Japan (CSA) classifications for application in gas up to Zone 1.
EE33 Humidity/Temperature Transmitter for High Humidity/Chemical Applications
Optimised for reliable humidity and temperature measurement in for applications with temporary condensation, permanent high humidity or chemical exposure.
View Details
EE23 Humidity & Temperature Transmitter (High Accuracy)
A cost optimized transmitter for industrial and high-end HVAC applications up to 180°C (356°F). Dew/Frost point temperature precisely calculated from RH and temperature.
View Details
