EE33 Humidity/Temperature Transmitter for High Humidity/Chemical Applications
Optimised for reliable humidity and temperature measurement in for applications with temporary condensation, permanent high humidity or chemical exposure.
Description
EE33 Humidity/Temperature Transmitter for High Humidity/Chemical Applications
Key Features:
- 0 to 100% RH range
- -40 to 356°F (-40 to 180°C) temp range
- Probes work up to 1450 psi (100 bar)
- Short response time (less than 15 seconds)
- Fast recovery after condensing conditions
- Highest measurement accuracy with monolithic humidity sensor
- Condensation prevention with dual heating system (sensor and probe heating)
- Precise measurement at permanent high humidity
- Outstanding temperature compensation
- Sensor protection against pollution and corrosion
- Probes compatible with modern, ventilated radiation shields
- Analogue current and voltage outputs configurable by the user
- Optional RS-485 and standard RS-232 interface
- Additional physical quantities calculated
Typical Application
- pharmaceutical and food industry
- driers for ceramics, wood, concrete, polyester etc.
- greenhouses, mushroom farms
- high-humidity storage rooms
- climate, test and curing chambers
- meteorology
EE33 Humidity/Temperature Transmitter for High Humidity/Chemical Applications
EE33 is optimized for reliable humidity and temperature measurement in applications with temporary condensation, permanent high humidity or chemical exposure. Condensation on the monolithic humidity sensor and the filter cap is prevented by controlled heating of the sensor.
The measuring principle of EE33 type J with separate humidity and temperature probes and dual heating enables precise continuous measurement even at permanent high humidity.
The remote probe can be employed up to 180°C (356°F) and the pressure tight version up to 100bar. The three-part design of rugged enclosure in polycarbonate or aluminum allows easy mounting and replacement. The measurands are available on two analog outputs and a serial interface.
An optional relay output can be used for alarms and process control. The proprietary coating protects the sensors and their leads against corrosive and electrically conductive pollution.
EE33 Humidity / Temperature Transmitter for High Humidity and Chemical Applications
| DATASHEET |
|---|
EE33 Datasheet(1331.43 kb) |
Scaling of the outputs(252.78 kb) |
EE-PCA Product Configuration Adapter(795.83 kb) |
Accessories(2457.9 kb) |
Humidity Calibration-Kit Datasheet(428.89 kb) |
| MANUAL |
|---|
EE33 Manual(6288.03 kb) |
Calibration Kit - User Guide(1042.14 kb) |
Cleaning Instructions(1054.21 kb) |
Relabeling in case of product configuration change(1339.66 kb) |
Related Products
EE212
Modular Humidity/Temperature Sensor
The EE212 humidity (RH) and temperature (T) sensor with interchangeable sensing module is optimized for demanding climate control applications in most various industries.
EE300Ex
Humidity and temperature transmitter for intrinsically safe applications
The EE300Ex humidity and temperature transmitter is dedicated for measurement in explosion hazard areas. It complies with the classifications for Europe (ATEX), International (IECEx), USA / Canada (FM), China (NEPSI) and Korea (KCs) and can be employed in gas and dust explosion hazard areas. The intrinsically safe EE300Ex can be installed in the explosion hazard area even in zones 0 / 20 (Divison 1).
EE260
Heated Humidity and Temperature Probe for Meteorology
The EE260 humidity and temperature probe with heated humidity sensing element and probe heating delivers precise and reliable measuring results even at high humidity conditions.
EE100Ex
Intrinsically Safe Humidity and Temperature Sensor
The EE100Ex intrinsically safe sensor is dedicated for measurement of relative humidity [RH] and temperature [T] in explosion hazard areas. It complies with the ATEX (Europe), IECEx (international), Korea (KCs) and Japan (CSA) classifications for application in gas up to Zone 1.
EE23 Humidity & Temperature Transmitter (High Accuracy)
A cost optimized transmitter for industrial and high-end HVAC applications up to 180°C (356°F). Dew/Frost point temperature precisely calculated from RH and temperature.
View Details
