EE680
Air Velocity Sensor for Laminar Flow Monitoring
The EE680 is dedicated for precise measurement of the air velocity and monitoring the temperature in laminar flow. The GMP compliant design is ideal for cleanrooms and safety cabinets in pharmaceutical, life sciences and microelectronics industries.
Description
EE680
Key Features
- Multipoint air velocity factory adjustment
- Clean room compatible design following GMP standards
- Stainless steel probe and sensing head
- Sensing element with E+E proprietary Coating
- Measurement range down to 0.1 m/s (20 ft/min)
- Combined air velocity and temperature measurement
- LED ring for condition visualization
- Modbus RTU or analogue outputs
- User configurable and adjustable
Technical data
- 0…2 m/s (0…400 ft/min MEASURING RANGE – AIR VELOCITY)
- 0.1…2 m/s (20…400 ft/min): ± (0.5 % of mv* + 0.05 m/s) ACCURACY – AIR VELOCITY * MV – MEASURED VALUE
- -20…70 °C (-4…158 °F) MEASURING RANGE – TEMPERATURE
- ±0.5 °C (±0.9 °F) ACCURACY – TEMPERATURE
- 0-5 V / 0-10 V or 0-20 mA / 4-20 mA (3-wire) ANALOG OUTPUTS
- Modbus RTU – DIGITAL OUTPUT
Outstanding Measurement Performance
The EE680 operates on the hot film anemometer principle. It employs an E+E thin film sensing element which stands for excellent accuracy down to 0.1 m/s (20 ft/min), outstanding long term stability and low angular dependency. The multipoint air velocity factory adjustment leads to best performance over the entire working range. The E+E proprietary coating protects the sensing element against H2O2 and corrosive cleaning agents.
Versatility
The EE680 is available as straight and angled version with various probe lengths and is optimized for easy cleaning. The mounting concept and the M12 stainless steel connector facilitate the easy installation or replacement of the sensor. A led ring integrated in the stainless steel enclosure shows the laminar flow conditions and the sensor status.
Analogue and Digital Outputs
The air velocity and temperature measured data is available as current or voltage analogue outputs or on the RS485 interface with Modbus RTU protocol, user selectable.
Configurable and Adjustable
The setup and adjustment of the EE680 can be easily performed with an optional adapter and the free PCS10 Product Configuration Software.
Downloads EE680
| DATASHEET |
|---|
EE680 Datasheet(826.17 kb) |
Accessories(4231.46 kb) |
| MANUAL |
|---|
EE680 Manual(977.77 kb) |
EE680 Quick Guide(452.37 kb) |
| SUPPORT LITERATURE |
|---|
Modbus Application Note AN0103(181.41 kb) |
| SOFTWARE |
|---|
PCS10 Product Configuration Software(61613.51 kb) |
| EU DECLARATION OF CONFORMITY |
|---|
EE680 CE-DoC(61.8 kb) |
Declaration of Conformity to EU REACH(72.4 kb) |
Related Products
EE660 Air Flow Sensor (Low Air Velocities)
Excellent accuracy down to 0.15 m/s (30 ft/min). Optimized for clean rooms and laminar flow monitoring.
View Details
EE671 – HVAC Air Velocity Probe
Very robust and highly insensitive to pollution. Measurement range up to 20 m/s (4000 ft/min). Voltage or ModBus RTU output.
View Details
TR9299-WiFi for LEED A Battery Powered CO2 Alarm And Monitoring Tool For LEED Point Certification (Copy)
Measure Temp & Humidity in environments up to 356ºF/180ºC Heated sensing tip can burn off containments, and also prevent condensation on the element in
View Details
TR9299-WiFi for LEED A Battery Powered CO2 Alarm And Monitoring Tool For LEED Point Certification
Measure Temp & Humidity in environments up to 356ºF/180ºC Heated sensing tip can burn off containments, and also prevent condensation on the element in
View Details
EE576 Miniature Air Flow Sensor (for low flow)
Excellent accuracy down to 0.2 m/s (40 ft/min). Voltage output. Optimized for clean rooms and laminar flow monitoring.
View Details
EE75 High Accuracy Air Flow Sensor
High accuracy measurement of flow and temperature in industrial processes up to 10 bar (145 psi) and 120C (248F). Also ideal as a reference unit for labs and test rigs.
View Details
