EE75 High Accuracy Air Flow Sensor
High accuracy measurement of flow and temperature in industrial processes up to 10 bar (145 psi) and 120C (248F). Also ideal as a reference unit for labs and test rigs.
Description
EE75 High Accuracy Air Flow Sensor
Key Features:
- Hot film sensor technology
- Measuring range:
- Velocity: 0 to 8000 ft/min (0 to 40 m/s)
- Temperature: -40 to 248°F (-40 to 120°C)
- Calculation of volumetric flow rate
- Low dependence on the angle of inflow
- Diameter: 0.3 inch (8mm)
- Remote probe up to 32.8 ft (10m)
- Pressure, humidity, & media low flow cut-off correction
- Pressure rating up to 145psi (10bar)
EE75 High Accuracy Air Flow Sensor
The EE75 air velocity transmitters are optimized for high accuracy up to 40 m/s (8000 ft/min) over the temperature range -40...120 °C (-40...248 °F).The high-end air velocity sensor element operates on the hot film anemometer principle and which stands out by high sensitivity even at very low airspeed and high insensitivity to pollution. T
he robust sensing probe and enclosure allow for EE75 use in a harsh industrial environment as well as in applications with a pressure rating up to 10 bar (145 psi).
Beside measuring air velocity and temperature, EE75 calculates the volumetric flow rate in m³/h or ft³/min based on the cross-section of the duct, with an appropriate factory correction. The EE75 can be used to measure the velocity of various non-flammable and non-corrosive gases.
Downloads EE75
| DATASHEET |
|---|
EE75 Datasheet(1110.6 kb) |
Scaling of the outputs(252.78 kb) |
| MANUAL |
|---|
EE75 Manual(1720.11 kb) |
| SOFTWARE |
|---|
EE75 Configuration Software(20596.07 kb) |
| SUPPORT LITERATURE |
|---|
EE75 Calibration manual(231.47 kb) |
EE75 Manual USB connection(39.24 kb) |
| EU DECLARATION OF CONFORMITY |
|---|
EE75 CE-DoC(292.32 kb) |
Declaration of Conformity to EU REACH(367.42 kb) |
Related Products
TR9299-WiFi for LEED A Battery Powered CO2 Alarm And Monitoring Tool For LEED Point Certification (Copy)
Measure Temp & Humidity in environments up to 356ºF/180ºC Heated sensing tip can burn off containments, and also prevent condensation on the element in
View Details
TR9299-WiFi for LEED A Battery Powered CO2 Alarm And Monitoring Tool For LEED Point Certification
Measure Temp & Humidity in environments up to 356ºF/180ºC Heated sensing tip can burn off containments, and also prevent condensation on the element in
View Details
EE576 Miniature Air Flow Sensor (for low flow)
Excellent accuracy down to 0.2 m/s (40 ft/min). Voltage output. Optimized for clean rooms and laminar flow monitoring.
View Details
EE671 – HVAC Air Velocity Probe
Very robust and highly insensitive to pollution. Measurement range up to 20 m/s (4000 ft/min). Voltage or ModBus RTU output.
View Details
EE680
Air Velocity Sensor for Laminar Flow Monitoring
The EE680 is dedicated for precise measurement of the air velocity and monitoring the temperature in laminar flow. The GMP compliant design is ideal for cleanrooms and safety cabinets in pharmaceutical, life sciences and microelectronics industries.
EE660 Air Flow Sensor (Low Air Velocities)
Excellent accuracy down to 0.15 m/s (30 ft/min). Optimized for clean rooms and laminar flow monitoring.
View Details
