If you can’t find what you’re looking for, please give us a call at 888-855-8880

EE33 Humidity/Temperature Transmitter for High Humidity/Chemical Applications

Optimised for reliable humidity and temperature measurement in for applications with temporary condensation, permanent high humidity or chemical exposure.

Description

EE33 Humidity/Temperature Transmitter for High Humidity/Chemical Applications

Key Features:

  • 0 to 100% RH range
  • -40 to 356°F (-40 to 180°C) temp range
  • Probes work up to 1450 psi (100 bar)
  • Short response time (less than 15 seconds)
  • Fast recovery after condensing conditions
  • Highest measurement accuracy with monolithic humidity sensor
  • Condensation prevention with dual heating system (sensor and probe heating)
  • Precise measurement at permanent high humidity
  • Outstanding temperature compensation
  • Sensor protection against pollution and corrosion
  • Probes compatible with modern, ventilated radiation shields
  • Analogue current and voltage outputs configurable by the user
  • Optional RS-485 and standard RS-232 interface
  • Additional physical quantities calculated

Typical Application

  • pharmaceutical and food industry
  • driers for ceramics, wood, concrete, polyester etc.
  • greenhouses, mushroom farms
  • high-humidity storage rooms
  • climate, test and curing chambers
  • meteorology

EE33 Humidity/Temperature Transmitter for High Humidity/Chemical Applications

EE33 is optimized for reliable humidity and temperature measurement in applications with temporary condensation, permanent high humidity or chemical exposure. Condensation on the monolithic humidity sensor and the filter cap is prevented by controlled heating of the sensor.

The measuring principle of EE33 type J with separate humidity and temperature probes and dual heating enables precise continuous measurement even at permanent high humidity.

The remote probe can be employed up to 180°C (356°F) and the pressure tight version up to 100bar. The three-part design of rugged enclosure in polycarbonate or aluminum allows easy mounting and replacement. The measurands are available on two analog outputs and a serial interface.

An optional relay output can be used for alarms and process control. The proprietary coating protects the sensors and their leads against corrosive and electrically conductive pollution.